Sensors; The Plug-In Sensors; V-Log 8'S Built-In Sensors; Changing A Sensors Range And Turning A Sensor On Or Off - Data Harvest EASYSENSE V-Log User Manual

Hide thumbs Also See for EASYSENSE V-Log:
Table of Contents

Advertisement

EASYSENSE V-Log User Guide

Sensors

The plug-in sensors

Plug the sensors into the sockets on the top of the V-Log logger.
When a sensor is connected it will automatically be detected and displayed on the LCD display.

V-Log 8's built-in sensors

The V-Log 8 has 4 built-in sensors – Sound, Light, Humidity and Air Pressure.

Changing a sensors range and turning a sensor on or off

Use
&
to scroll the list until the pointer is pointing at Meter
and select
.
Select
again.
Use
&
to scroll until the pointer is pointing at the appropriate
sensor and select
Use
&
to scroll until the pointer is pointing at the appropriate
option i.e. Set range or Turn Off, and select
Note: If a sensor only has one range then only Turn Off will be available.
Set range
The pointer will indicate the current range selected.
Use
&
to scroll until the pointer is pointing at the required range.
Select
to choose that range.
Select
to exit the sensor option window, then
 Data Harvest Group Ltd, 2014
Built-in Sensor
Sound
Light level
Humidity
Air Pressure
.
Ranges
40 to 110 dBA
±2000 mV
Indoor (Slow) 1 k lx (0 to 1,000 lx)
Indoor (Fast) 1 k lx (0 to 1,000 lx)
In/Out
10 k lx (0 to 10,000 lx)
Outdoor
100 k lx (0 to 100,000 lx)
0 to 100% RH
85 to 110 kPa
850 to 1100 mbar
23 to 33 inHg
-200 to 1,000 m
-500 to 5,000 m
-500 to 10,000 m
.
again to return to the Meters window.
4
DS133 (5)
Meter
Pictogram
EasyLog
5) Sound
6) Light
7) Pressure
Light
Set range
Turn Off
Light
10k lx
100k lx

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the EASYSENSE V-Log and is the answer not in the manual?

Subscribe to Our Youtube Channel

Table of Contents