Data Harvest EASYSENSE Q3+ User Manual page 38

EASYSENSE Q3+ and Q5+
Method 1
• Close the Bluetooth Device Wizard.
• From the Devices manager select the COM Ports tab (N) and click on Add (O).
N
O
• Click on Outgoing (P), select the logger from the drop-down list of devices (Q) and click on OK.
The Outgoing COM port should now be listed.
Method 2
• From the Devices manager select the Devices tab (R).
• Select the EASYSENSE Q logger (S) and then Properties (T).
R
S
• Select the Services tab (U), select the check box next to Serial port (V) and click on Apply
(W). When the COM port for the serial port (X) is shown click on OK.
• Click on the COM ports tab and note the Outgoing COM port number. Remove the incoming
COM port if listed.
Question 7: Do the batteries need to be discharged/ reconditioned?
No, the battery is lithium ion and is 'memory-free'. Avoid full discharges when ever possible.
Constant partial discharges with frequent recharges will not cause any harm.
Question 8: My batteries do not seem to hold their charge any more. Do I need to send the unit
back for a replacement to be fitted?
No, order a replacement battery pack from Data Harvest - Product No. 5007.
© Data Harvest Group Ltd.
P
U
V
T
38
DO185 (2)
Q
X
W