Data Harvest EASYSENSE Q3+ User Manual page 33

EASYSENSE Q3+ and Q5+
On EASYSENSE Q:
3. Connect EASYSENSE Q to its mains power supply.
4. Use the blue (▼▲) buttons to scroll the main menu
until the pointer is pointing at System. Press the
green ► button to select.
5. Use the blue (▼▲) buttons to scroll the menu until
the pointer is pointing at Bluetooth. Press the green
► button to select.
6. Use the blue (▼▲) buttons to scroll the menu until
the pointer is pointing at Pair Bluetooth. Press the
green ► button to select.
The LCD screen will show:
• EASYSENSE Q's serial number, which will be used to identify the logger in the
new devices list e.g. 080618-131134.
• Passkey: All EASYSENSE Q loggers have a passkey of 1234. The passkey is not
configurable and is fixed at manufacture.
• Pairing message: displays the point in the pairing process that EASYSENSE Q has
reached. The messages are:
Powered – shown when the Bluetooth module in EASYSENSE Q is initialised.
Pairing enabled – EASYSENSE Q is transmitting pairing information that can be
received by a Bluetooth receiver (the Bluetooth USB adapter or the PC).
Paired: xxxxxxxxxx (e.g. 000B0D6904AE) – the pairing between EASYSENSE Q and
the receiver is complete (the number is the Mac address for the Bluetooth device that it is
currently paired with).
On the computer
7. Tick the box on the Wizard to
indicate 'My device is set up and
ready to be found'
8. Click on Next to begin
9. Your PC will
search for any
Bluetooth
devices that are
discoverable and
within range.
10. Click on the EASYSENSE Q that
is going to be paired with
11. Click on Next.
© Data Harvest Group Ltd.
(C).
(D).
33
► System
► Bluetooth
► Pair Bluetooth
(C)
(D)
DO185 (2)
Switch off
Meter
Snapshot
Battery life
Sensor ON/OFF
Bluetooth On/Off