Insert The Cushion Pad; Install The Inlet Hose - A Kitchen Sink Or A Shower - Daewoo MINI Series Service Manual

9. Insert the cushion pad

- Attach pads on the fi x ed anchors.
- Push the pad to the wal l .
12. Fix the washing machine.
- Fi x the i t ems as fol l o ws: Rubber pad (1ea) -> Pl a i n
washer (1ea) -> Spri n g washer (1ea) -> Nut (1ea)
-> Spri n g washer (1ea) ->nut (1ea)
- Fasten the nut wi t h a spanner.
※ Excessive fastening of the nut may cause damage to
the washing machine or the wall tile.
※ Fixing nut must be fastened to the end.
ⓛ Cl o se the water suppl y val v e
② Di s assembl e the water suppl y val v e
③ I n stal l the branchi n g adapter (i n stal l
adapters accordi n gl y on col d and hot
water taps)
④ Branch off the i n l e t hose.

13-2 Install the inlet hose - a kitchen sink or a shower

① I n stal l the water tap connector on
the faucet (ski p i f i t i s a buri e d
faucet)
② I n stal l the branchi n g adapter.
③ Connect the i n l e t hose.
※ Check leakage after installation.
10. Install the washing machine.
- I n stal l the washi n g machi n e sti c k to the wal l
surface.
① Cl o se the water suppl y val v e ② Di s assembl e the water suppl y val v e
③ I n stal l the branchi n g adapter ④ Branch off the i n l e t hose.
※ Wrap the connection of the branching adapter and water supply valve with Teflon tape.
※ Check leakage after installation.
13-2 Install the inlet hose - a kitchen sink or a shower
- Organi z e and pl a ce hoses i n the hol e .
※ Caution: Be careful not to jam the hoses between the
wall and the washing machine.
13-1. Install the inlet hose - Regular faucet
Hot Cold
water water
- Run a test operati o n to check i f there i s any
mal f uncti o n / l e akage.
53
11. Organize hoses
For hot
water
For cold
water
14. Test operation