Daewoo MINI Series Service Manual page 55

15. Organize the inlet and drain hoses and power cord
- Organi z e the i n l e t and drai n hoses usi n g mol d i n g and hose gui d e.
The washing machine is recommended to be installed by a professional service engineer.
- Follow the table below when drilling the tiles with tools.
Note Wall type
Hollow wall
perforated wall
Concrete wall
※ Wipe and clean the attachment area
with a dry patch and attach the
molding and hose guide tightly.
Depth of Hole Bit diameter of hammer drill
Tile + 100mm
54
16. Mount the Body
- Connect 4 upper and l o wer bol t s after mounti n g the body.
※ Check if there is any space on either side.
Bit diameter of tile hole
ø 14mm ø 16mm