Program Functions; Wash Program; Wash Times - Daewoo MINI Series Service Manual

2. Program Functions

2-1. Wash Program

1) Wash Programs
1 The default washing times and water levels apply for all the programs without sensing the load.

2) Wash Times

1. MINI 1.0: D-CV701*, WFWM11*
Category
Program
Normal
Delicate
Baby Care
Night Time
QUICK15
INTENSIVE
INTENSIVE40
INTENSIVE60
2. MINI 1.5: ODW30-999B, ODW30-999G, DWM30-999PG, WFWM12*
Category
Water level
Program
Normal
Delicate
Baby Care
Speed up
Tub Clean
* Washing time after the water temperature reaches the target level.
1 The washing time consists of heating cycle and post-heating main wash cycle. The time displayed for
heating cycle elapses immediately on completion of heating cycle or remains unchanged until the heating
cycle is over.
2 The heating cycle is complete when the water temperature reaches the target level.
- If the water temperature doesn't reach the target level after the heating cycle under the Baby Care, Cotton
40, Cotton 60, Intensive 40, Intensive 60, program, the time on display stops declining and an additional
heating cycle applies for 10 minutes. If the water temperature doesn't reach the target level after the
additional cycle, the heating cycle is suspended and the main wash cycle starts.
3 The water heater does not resume its operation after it is turned off when the water temperature reaches the
target level.
Time of water
Water level
supply
Default 2min
Default 2min
Default 2min
Default 2min
Default 2min
Default 2min
Default 2min
Default 2min
Time of water
supply
Default 2min
Default 2min
Default 2min
Default 2min
Default 2min
Heating time
-
-
47min
-
-
-
15min
60(NO Heating)+20min
Wash 1 time Heating time
4min -
5min -
2min 47min
4min -
5min -
19
Wash time Total wash time
8min 10min
11min 13min
15min 64min
12min 14min
4min 6min
10min 12min
25min 42min
228min 310min
Total wash
Wash 3 time
time
4min 10min
6min 13min
13min 64min
0min 6min
5min 12min