Washing Procedure And Program Selection - Daewoo DWD-M1051 Instruction Manual

Rinse : Rinse cycle with subsequent spin cycle for rinsing hand-washed items.
Spin : Spin cycle after a program with setting 'Rinse Hold' is finished or for spinning hand-washed washing.
Washing and rinsing water is drained before the spin cycle.
Drain : Water is drained after program with setting 'Rinse Hold' is finished.
Rinse+ : Additional rinsing of laundry. Program duration and rinsing water is extended accordingly. This help to
remove residuary traces of detergent and recommended in area with very soft water.
Rinse+ option is selectable with all programs except WOOL, Hand Wash and Drain programs.
Rinse Hold : For delicate textiles and net curtains. All program can be carried out without the final spin cycle.
The laundry is left in the final rinsing water. Before the laundry is unloaded, the 'Drain' or 'Spin'
must be run by using program selector.
Rinse Hold option is not selectable with WOOL/Hand Wash, Rinse, Spin 500rpm, Spin 1000rpm
and Drain programs.

WASHING PROCEDURE AND PROGRAM SELECTION

Washing Procedure
• Turn the program selector to the desired program.
The indicator light of Start/Hold button is on.
• If required, press the button(s) for option(s).
The indicator light of the selected option button is on.
Note
If you want to finish washing program during 'Rinse Hold'
process, press the 'Start/Hold' button once. Then the 'Rinse
Hold' process stops and the 'Spin' course selected
automatically. (The indicator light of 'Rinse Hold' button is
not twinkle anymore.) When you press the 'Start/Hold'
button once again, spin sequence begin. You can take out
laundry after spin course finish.
• Press the Start/Hold button.
The selected program starts and the indicator light of
Start/Hold button twinkle.
10