OCP cards
Removing the OCP filler
Prerequisites
1. Follow the safety guidelines listed in
2.
Remove the expansion card riser
3.
Remove the expansion card riser
Steps
Hold and lift the OCP filler from the OCP slot on the chassis.
Figure 52. Removing the OCP card filler
Next steps
1.
Install the OCP
card.
2.
Install the expansion card riser
3.
Install the expansion card riser
Installing an OCP card
Prerequisites
NOTE:
The procedure to install the OCP blank is similar to the removal of a OCP card.
1. Follow the safety guidelines listed in
2.
Remove the expansion card riser
3.
Remove the expansion card riser
4.
Remove the OCP
filler.
Steps
1. Slide the OCP card and push until it is firmly connected to the system board connector.
NOTE:
Ensure to lift the OCP card retention latch if it is in the lock position.
70
Installing and removing system components for PowerEdge C6525
Safety
instructions.
1.
2.
2.
1.
Safety
instructions.
1.
2.