Magicfx Power Drop User Manual page 12

User Documentation MAGICFX® Power Drop
4.
5.
6.
7.
Page 11
To connect the next Power Drop use the
powerCON to powerCON cable.
Never use more than 25 Power Drops in
series on a standard 16 Amp outlet.
Connect the Power Drops to a 230VAC
power source to check if all the Power
Drops are connected. If all the Power
Drops are connected in the right way all
LED indicators light up.
Disconnect the Power Drops from the
power source and add a power switch to
control the Power Drops.
Make sure the switch is able to switch the
current used by the Power Drops.
Now u can secure your backdrop in the
Power Drops .
If the backdrop has rings in it u can hook
it over the drop lever and lock in the drop
lever. Continue this until the entire
backdrop is locked in.