Magicfx Power Drop User Manual page 13

8.
9.
If the backdrop doesn't include rings u
can use the special curtain clamps.
The curtain clamp can be secured to the
backdrop by placing it over the edge f the
backdrop and locking it in its place.
Next use the same procedure as in step 7.
If u want to release the backdrop
manually use the reset pin on the back of
the Power Drop.
By pressing the reset pin up the drop
lever will be released.
Always use a safety cable to ensure the
Power Drop to the construction.
On the Power Drop there is a safety hook
for a safety cable.
Version 1.0
Page 12