Polaris 2880325 Quick Manual

Trailerable cover kit

TRAILERABLE COVER KIT

P/N 2880325

APPLICATION

RZR 900

BEFORE YOU BEGIN

Read these instructions twice and check to be sure all parts and tools are accounted for. Please retain these

Installation Instructions for future reference and parts ordering information.

Ref

Safety Goggles

5 mins

IMPORTANT

Your Polaris TRAILERABLE COVER KIT is exclusively designed for your vehicle. Please read the installation

instructions thoroughly before beginning. Installation is easier if the vehicle is clean and free of debris. For

your safety, and to ensure a satisfactory installation, perform all installation steps correctly in the sequence

shown.

Qty

Part Description

Trailerable Cover

P/N 9925259 Rev 01 05/14 Page 1 of 3

Instructions

Part Number

2880325

9925259

Table of Contents

Do you have a question about the 2880325 and is the answer not in the manual?

Page 1 5 mins IMPORTANT Your Polaris TRAILERABLE COVER KIT is exclusively designed for your vehicle. Please read the installation instructions thoroughly before beginning. Installation is easier if the vehicle is clean and free of debris. For your safety, and to ensure a satisfactory installation, perform all installation steps correctly in the sequence shown.
Page 2 INSTALLATION INSTRUCTIONS 1. Place the vehicle in “PARK” and turn the key to “OFF” position. Remove the key from the vehicle. 2. If a spare tire is in place, remove the tire and the tie down clamp before using the cover to trailer. 3.
Page 3 7. Pull cover down as far as possible down over all four tires as shown in figure. 8. Ratchet webbing tight. Guide webbing into spool. Apply about 10-15 ft. lbs. (13.5-20 Nm) of pressure on the handle. 9. Attach the male buckle (E) of the center strap to the female buckle sewn to the cover.