Advertisement
Quick Links
DOOR BAG KIT
P/N 2880612; 2880613
APPLICATION
RZR 900 S
BEFORE YOU BEGIN
Before you begin, read these instructions twice and check to be sure all parts and tools are accounted for.
Please retain these installation instructions for future reference and parts ordering information.
1
KIT CONTENTS (PN 2880612)
Ref
1
2
2
Qty
Part Description
1
Upper Front Door Bag-60, LH
1
Upper Front Door Bag-60, RH
1
P/N 9925506 Rev 01 05/14 Page 1 of 5
Instructions
Part Number
2635598
2635599
9925506
Advertisement
Related Manuals for Polaris 2880612
Summary of Contents for Polaris 2880612
- Page 1 BEFORE YOU BEGIN Before you begin, read these instructions twice and check to be sure all parts and tools are accounted for. Please retain these installation instructions for future reference and parts ordering information. KIT CONTENTS (PN 2880612) Part Description Part Number...
-
Page 2: Tools Needed
15 mins IMPORTANT Your Polaris DOOR BAG KIT is exclusively designed for your vehicle. Please read the installation instructions thoroughly before beginning. Installation is easier if the vehicle is clean and free of debris. For your safety, and to ensure a satisfactory installation, perform all installation steps correctly in the sequence shown. -
Page 3: Installation Instructions
INSTALLATION INSTRUCTIONS For Kit PN 2880612 1. Place the vehicle in “PARK” and turn the key to “OFF” position. Remove the key from the vehicle. 2. On the passenger side, remove the plastic door by removing screws (A) at six locations as shown in figure. - Page 4 4. Wrap and tie the Velcro (D) to the door stamping at three places as shown in figure. 5. Reinstall the plastic door and attach six screws removed in the Step 1. NOTE: The four screws (E) need to be installed inside the upper door bag through the provided holes as shown in figure.
- Page 5 For Kit PN 2880613 1. On the passenger side lower door, place the RH side lower front door bag (PN 2635601) on the door stamping and hook the three plastic hooks (F) on top as shown figure. 2. Wrap and tie the Velcro (G) to the door stamping at three places as shown in figure.