Page 1
SKID PLATE KIT P/N 2880290 Application RZR 900 and RZR 900 S Before you begin, read these instructions twice and check to be sure all parts and tools are accounted for. Please retain these installation instructions for future reference and parts ordering information.
Page 2
IMPORTANT: Your Polaris SKID PLATE KIT is exclusively designed for your vehicle. Please read the installation instructions thoroughly before beginning. Installation is easier if the vehicle is clean and free of debris. For your safety and to ensure a satisfactory installation, perform all installation steps correctly and in the sequence shown.
Page 3
4. Insert bracket clip on chassis bracket at four locations as shown in Figure 3. Bracket Figure 3 5. Install the new mid skid plate using 6 mm X 25 screws and washers at seven locations. Figure 4. NOTE: Torque the screws to 15 ft. lbs. (20.33 Nm).