Checking The Oil Level In The Exciter Housing; Measures Prior To Extended Shut-Down Period - Fayat Group BOMAG BPR 35/60 Operating Instruction, Maintenance Instruction

Maintenance – As required
8.10.5

Checking the oil level in the exciter housing

1
Fig. 120
8.10.6

Measures prior to extended shut-down period

8.10.6.1 Measures before shutting down
98
NOTICE!
Components may get damaged!
–
Protective equipment:
1. Park the machine on level ground.
2. Park the machine safely
in secured condition' on page 57.
3. Allow the machine to cool down.
4. Clean the area around the bleeding screw (1) and filling/drain
plug (2).
5. Unscrew the bleeding screw.
NOTICE!
2
Components may get damaged!
Do not use low-ash engine oils for the exciter shaft
housing.
B-692-0011
6. Unscrew the filling/drain plug and check the oil level; top up if
necessary.
ð Nominal value: Bottom edge of filling/drain bore.
7. Clean the bleed screw and filling/drain plug and screw them
in with a low-strength sealing agent (e.g. spare parts number:
009 700 16).
DANGER!
Danger to life caused by explosive gas-air
mixes!
–
–
–
–
BPR 35/60
Use only oil of the permitted specification
Ä Chapter 8.3 'List of fuels and lubricants'
on page 69.
n Working clothes
n Safety shoes
n Protective gloves
Ä Chapter 6.4 'Parking the machine
Do not allow gasoline to come into contact with
hot components.
Smoking and open fire is prohibited.
Keep away from heat sources, sparks and
other sources of ignition.
Do not spill any gasoline.