Maintenance Work; Preliminary Remarks; Working On The Engine; Cleaning Work - Fayat Group BOMAG BPR 35/60 Operating Instruction, Maintenance Instruction

3.9 Maintenance work

3.9.1 Preliminary remarks

3.9.2 Working on the engine

3.9.3 Cleaning work

3.9.4 Measures for longer shut-down periods

3.9.5 After maintenance work

Concerning your safety – Maintenance work
Always carry out the prescribed maintenance work and mainte-
nance measures on time in order to maintain the safety, opera-
tional readiness and long service life of the machine.
The machine must only be serviced by qualified personnel author-
ised by the operating company.
Drain the engine oil at operating temperature – danger of scalding!
Wipe off spilled oil, catch running out oil and dispose of environ-
mentally.
When working on the air filter no dirt should fall into the air duct.
Do not work on the hot exhaust - danger of burning!
Store used filters and other oil contaminated materials in a sepa-
rate, specially marked container and dispose of environmentally.
Do not perform cleaning work while the motor is running.
Allow the engine to cool down before starting cleaning work.
Do not use gasoline or other easily inflammable substances for
cleaning.
If the machine is taken out of operation for a longer period of time,
various conditions must be met and maintenance work must be
carried out both before and after shut-down
'Measures prior to extended shut-down period' on page 98.
It is not necessary to define a maximum storage period if these
measures have been performed.
Reassemble all guards and protections.
BPR 35/60
Ä Chapter 8.10.6
33