Final Shut-Down Of Machine - Fayat Group BOMAG BPR 35/60 Operating Instruction, Maintenance Instruction

Disposal – Final shut-down of machine
10.1

Final shut-down of machine

112
After the machine has reached the end of its service life, the indi-
vidual components of the machine must be disposed of properly.
Observe national regulations!
Carry out the following work and have the machine dismantled by a
state-approved recycling company.
DANGER!
Danger to life caused by explosive gas-air
mixes!
– Do not allow gasoline to come into contact with
hot components.
– Smoking and open fire is prohibited.
– Keep gasoline away from heat sources, sparks
and other sources of ignition.
– Do not spill any gasoline.
– Components that previously contained gaso-
line must not be cut with a cutting torch.
WARNING!
Health hazard caused by fuels and lubricants!
– Safety regulations and environmental protec-
tion regulations must be followed when han-
dling fuels and lubricants
dling fuels and lubricants' on page 23.
Protective equipment: n
n
n
n
1. Empty the fuel tank.
2. Drain engine oil from engine and exciter housing.
3. Drain off hydraulic oil.
BPR 35/60
Ä Chapter 3.4 'Han-
Working clothes
Safety shoes
Protective gloves
Safety goggles