Malfunctions During Operation - Fayat Group BOMAG BPR 35/60 Operating Instruction, Maintenance Instruction

9.2 Malfunctions during operation

Fault Possible cause
The machines Air in the hydraulic system of the steering
vibrates forward rod
with a strongly
The oil level in the exciter shaft housing
reduced speed
is too low
Release pressure from the steering
rod
1
Fig. 125
Troubleshooting – Malfunctions during operation
Protective equipment:
1. Park the machine safely
in secured condition' on page 57.
2. Press the handle forward against the end stop and hold it in
this position.
3. Carefully loosen the filler screw (1).
ð The air makes a slight hissing sound when escaping.
4. Wait until all air has escaped and then tighten the filler screw.
B-695-0018
BPR 35/60
Remedy
Release pressure from the steering rod
Check the oil level in the exciter shaft
housing
n Working clothes
n Safety shoes
Protective gloves
n
Ä Chapter 6.4 'Parking the machine
105