Maintenance – Every 2 years/every 500 operating hours
Fig. 108
Fig. 109
Fig. 110
Fig. 111
92
5.
Unscrew the bleeding screw and collect any oil running out.
6.
Screw in the bleeding screw.
B-692-0072
7.
Clean the area around the oil level inspection plug and
unscrew the plug.
B-695-0013
8.
Place a cloth underneath the filler bore to collect leaking oil.
NOTICE!
Components may get damaged!
–
Use only oil of the permitted specification.
9.
Fill in oil through the filler bore, until it starts to run out
through the level inspection bore.
B-695-0017
10.
Slacken the bleeding screw.
11.
Wait until all air has escaped and then tighten the bleeding
screw.
B-692-0072
BPR 35/60