Semi-Annually; Changing The Engine Oil - Fayat Group BOMAG BPR 35/60 Operating Instruction, Maintenance Instruction

8.7 Semi-annually

8.7.1 Changing the engine oil

Fig. 64
1
2
Fig. 65
MAX
MIN
Fig. 66
NOTICE!
Danger of engine damage!
–
B-SYM-1078
–
–
Protective equipment:
1. Park the machine safely
in secured condition' on page 57.
2.
Clean the area around oil dipstick (1) and drain plug (2).
3. Unscrew the oil dipstick.
B-692-0164
4. Unscrew the drain plug and collect any oil running out.
5. Clean the drain plug and screw it back in, tightening torque:
15 Nm (11 ft·lbf).
6. Fill in fresh oil up to the bottom edge of the filler bore.
7. Screw the oil dipstick in.
8. Check for leaks after a short test run.
9. Check the oil level on the dipstick, correct if necessary.
10. Dispose of oil in line with environmental regulations.
B-692-0165
BPR 35/60
Maintenance – Semi-annually
Change the oil only with the engine at oper-
ating temperature.
Use only oil of the permitted specification
Ä Chapter 8.2.1 'Engine oil' on page 67.
Ä Chapter 8.3 'List of fuels and
Filling quantity:
lubricants' on page 69
n Working clothes
n Safety shoes
Protective gloves
n
Ä Chapter 6.4 'Parking the machine
WARNING!
Danger of burning on hot components!
– Wear your personal protective equipment
(protective gloves, protective clothing).
– Avoid touching hot components.
75