Final Shut-Down Of Machine - Fayat Group DYNAPAC DFP7AX Operating Instruction

Single direction vibratory plate
Table of Contents

Advertisement

Disposal – Final shut-down of machine
10.1

Final shut-down of machine

110
If the machine can no longer be used and needs to be finally shut
down you must carry out the following work and have the machine
disassembled by an officially recognized specialist workshop.
DANGER!
Danger to life caused by explosive gas-air
mixes!
Do not allow gasoline to come into contact with
hot components.
Smoking and open fire is prohibited.
Keep gasoline away from heat sources, sparks
and other sources of ignition.
Do not spill any gasoline.
Components that previously contained gaso-
line must not be cut with a cutting torch.
WARNING!
Health hazard caused by fuels and lubricants!
Safety regulations and environmental protec-
tion regulations must be followed when han-
dling fuels and lubricants
dling fuels and lubricants" on page 23.
Protective equipment:
1.
Empty the fuel tank.
2.
Drain engine oil from engine and exciter housing.
DFP7AX
Ä Chapter 3.4 „Han-
n
Working clothes
n
Safety shoes
n
Protective gloves
n
Safety goggles

Advertisement

Table of Contents
loading

Table of Contents