Advertisement
ld (Rope/Chain Only)
Appears during AA150 power
up. The AA150 will count
and will display a sensor
pulse. The count will not be
accurate.
AA150 counts when the
windlass is not turning or
counts erratically displaying a
large number eg 888.
The count pauses during
retrieval.
FOR AddITIONAl TROuBleshOOTING:
Contact AutoAnchor support on:
www.autoanchor.co.nz/autoanchor-installation-help.php Fill in the information form.
Email: support@autoanchor.co.nz or Telephone: +64 9 419 1219
To the best of our knowledge the information in these instructions was correct at the time
of printing. however, the AutoAnchor products are continuously being reviewed and
improved and product specifications may be changed without notice. The latest product
specifications may not be reflected in this version of the instructions. The documentation
relating to the AutoAnchor products is created in the English language and can be
translated from English to another language. In the event of any conflict between
translated documents, the English language version will be the official version.
uK and International Distribution
Lewmar
Southmoor Lane
havant
Hampshire PO9 1JJ
England
Tel: +44 23 9247 1841
Fax: +44 23 9248 5720
Email: info@lewmar.com
AutoAnchor is a trademark of RMSD limited Copyright © 2009 RMSD limited, New Zealand 9901/04/10
The load sensor wires are not connected to the motor. Fix the
connection and reset the counter to zero.
The sensor could be damaged, incorrect cable may be fitted,
or the AA150 may have been subject to external interference,
either RF or electrical. Check that the sensor cable is not
damaged and that the specified cable has been fitted. Check
for external interference on the boat eg damaged or loose RF
cables or aerials or other instruments that may not be working
correctly or have been damaged by electrical interference
including lightning.
This is not a fault. The rode is changing from rope to chain.
USA
Lewmar Incorporated
351 New Whitfield Street
Guilford CT 06437
USA
Tel: + 1 203 458 6200
Fax: + 1 203 453 5669
Email: info@lewmar.com
Australia/Asia
lewmar Navtec Australasia Pty ltd
4/224 Headland Road
Dee Why
New South Wales 2099
Australia
Tel: +61 2 9936 7111
Fax: +61 2 9936 7112
Email: info@lewmar.com.au
9901/04/10
Advertisement
