Switching By Webinterface; Switching; Batchmode - Gude Expert Power Control 1000 Manual

Expert Power Control 1000 / 1001
5.2

Switching by Webinterface

Go to the website of Expert Power Control 1000 / 1001. Enter the IP address of Expert Power Control 1000 / 1001 into the
address line of your internet browser:
http://"IP address of Expert Power Control 1000 / 1001"/ and press LOGIN
5.2.1

Switching

Here you are able to switch the ports directly.
You can check the status of the Power Port by the color of the Power Port status LED (green=enabled/red=disabled).
5.2.2

Batchmode

The of Expert Power Control 1000 / 1001 can be switched on or switched off for a selectable delay (1-30 sec. or 1-30
min.). After the chosen delay the selected port will be switched off or switched on again auto-matically.
Optionally the device can be accessed by using the perl script „EPC_Control2.pl" through the command line (e.g. for
automatic or time-triggered switching).
For more information please refer to our website:
www.gude.info/wiki
14
Operation