Configuration Via Webinterface; Configuration - Power Ports - Gude Expert Power Control 1000 Manual

Expert Power Control 1000 / 1001
4.3

Configuration via webinterface

Go to the website of Expert Power Control 1000 / 1001. Enter the IP address of Expert Power Control 1000 / 1001 into the
address line of your internet browser:
http://"IP address of Expert Power Control 1000 / 1001"/
and press LOGIN.
To enter the configuration menu, click on „Configuration" on the upper left side of the screen.
4.3.1

Configuration - Power Ports

4.3.1.1 Label
A name with a maximum of 15 characters can be entered here for each Power Port.
4.3.1.2 After power-up switch
The Power Port's switching state after a power-on of the device can be defined here (on, off, remember last state).
4.3.1.3 If switching on after power-up, wait ...
A switching delay of a Power Port can be defined here that is applied after switch on of the device. The delay can last up to
8191 seconds.
4.3.1.4 After turning off, wait ...
While this function is enabled, the Power Port will reactive after the stated time, when it got switched off.
7
Configuration