Citizen E610 Instruction Manual page 56

(2) Return the crown to the normal position.
• The second hand moves to the reference position (0:00) and stops.
If the reference positions of each hand are properly displayed as described above,
pull the crown out to Position 1, turn it and return the watch to the mode in which
is was previously being used.
<Reference Position of Each Hand>
• 24 hour hand: 24 hours 0 minutes
• Hour hand, minute hand: 0 hours 0 minutes
• Second hand: 0 seconds
• Function hand: MON
• Date: Between 31st and 1st
* If the display of the watch is not as
shown above, perform Reference Position
Correction described in the following section.
[Correct Reference Position
of Each Hand]
Button (B)
Mode
switching
position
(0) (1) (2)
Button (A)
Reference
position
correction
position
157