Citizen E610 Instruction Manual page 48

<Time Correction Procedure>
Pull the crown out to Position 1 and turn to align the mode hand at [TME] (time).
(1) Pull the crown out to Position 2 (time correction position).
• The second hand turns continuously at one second intervals to display the current time.
(2) Press button (A) or (B) once while the second hand is moving at one second
intervals.
• When either button is pressed once, the second hand advances (clockwise
direction) to the 0 seconds position and stops.
(3) Turn the crown to align the minute hand, hour hand and 24 hour hand to the current time.
Turning the crown to the right (by one click) causes the minute hand, hour hand

and 24 hour hand to advance by one minute.
Turning the crown to the left (by one click) causes the minute hand, hour hand and
‚
24 hour hand to go back by one minute.
• Turning the crown continuously (by two clicks or more) causes the minute hand,
hour hand and 24 hour hand to move continuously.
• Turn the crown to the left or right to interrupt continuous movement of the hands.
• Check AM and PM with the 24 hour hand to set the time correctly.
(4) Return the crown to the normal position in synchronization with a telephone time
signal or other time service.
149