Citizen E610 Instruction Manual page 46

• Press button (B) to move the second hand to the alarm ON position.
• Each time button (B) is pressed, a confirmatory tone sounds and the alarm
setting switches between ON and OFF.
The setting can be changed while the crown is in the normal position or when
pulled out to Position 1.
(2) Turn the crown to set the correct alarm time while checking AM and PM with
the 24 hour hand.
 Turning the crown to the right (by 1 click) causes the minute hand and hour
hand to advance by 1 minute.
‚ Turning the crown to the left (by 1 click) causes the minute hand and hour
hand to go back by 1 minute.
• Turning the crown continuously (rapidly by 2 clicks or more) causes the
hour and minute hands to move continuously.
• Turn the crown to the left or right to interrupt continuous movement of
the hands.
(3) Push in the crown to Position 1 to return the watch to previously used mode.
(4) Return the crown to the normal position. This completes the procedure for
setting the alarm time.
147