Citizen E61 Series Abbreviated Instruction

English
• This watch is solar-powered. Expose the dial to light and use it sufficiently charged.
• To see details of charging time, specifications and operations, refer to the instruction manual.
Component identification
Reception-in-progress
Reception result
indication (RX)
indication (NO)
Second hand
Hour hand
24-hour hand
Summer time
indication (ON/OFF)
• Actual appearance may differ from the illustration.
• The crown has two positions when pulling it out.
Checking the signal reception result
• This watch receives the time signal from the Japan station every day to adjust
time automatically.
1.
Pull the crown out to position
2.
Rotate the crown to change the mode to [TME] or [L-TM].
3.
Push the crown in to position
4.
Press and release the lower right button
The second hand moves to indicate the result of the last reception.
Indication
H
The reception was successful in a very good condition.
M
The reception was successful in a good condition.
L The reception was successful in a not-good condition.
NO The reception failed.
• Try signal reception following the steps in
(on-demand reception) if the last reception failed.
5.
Press and release the lower right button
procedure.
The indication returns to current time.
• It returns to current time indication automatically in about 10 seconds
without pressing the button.
E61* Abbreviated instruction
Reception result
indication (H/M/L)
Button
B
Crown
Function hand
Date indication
Button A
Minute hand
Mode hand
Crown's position
0 1 2
.
1
.
0
.
A
Reception result
Receiving the signal manually
to finish the
A
Receiving the signal manually (on-demand reception)
• It takes 2-15 minutes to finish reception.
1.
Pull the crown out to position
2.
Rotate the crown to change the mode to [TME] or [L-TM].
3.
Push the crown in to position
4.
Press and hold the lower right button
The second hand points "RX" and signal reception starts. The second hand
returns to normal movement after finishing reception.
Reception was successful
Reception failed
• Press and hold button
A
Using the local time
You can set time difference from the time of [TME] in 1-hour increments to
indicate the local time. You can apply summer time to the local time.
• The time difference is adjustable within a range of ‒20 hours - +3 hours from
the time of [TME].
Checking the summer time setting
1.
Pull the crown out to position
2.
Rotate the crown to change the mode to [L-TM].
Local time is indicated.
3.
Press and release the upper right button
The second hand indicates the summer time setting ("ON" or "OFF") for
about 10 seconds.
4.
Rotate the crown to change the mode to what you want.
5.
Push the crown in to position
Setting the local time and summer time
1.
Pull the crown out to position
2.
Rotate the crown to change the mode to [L-TM].
Local time currently set is indicated.
3.
Pull the crown out to position
The second hand indicates the summer time setting ("ON" or "OFF").
4.
Press and release the upper right button
summer time setting.
Each time you press the button, the beep sounds and the summer time setting
changes alternately between "ON" and "OFF".
• The hour hand moves forward by 1 hour when the setting is changed to
"ON".
5.
Rotate the crown to adjust the local time.
• When you rotate the crown quickly, the hands will move continuously. To
stop the rapid movement, rotate the crown in either direction.
• Check AM/PM referring to the 24-hour hand.
• The adjustable range is ‒19 hours - +4 hours when the summer time setting
is "ON".
6.
Push the crown in to position
1/2
.
1
.
0
for 2 seconds or more.
A
The beep sounds twice. The time will be updated.
The beep sounds once. The time is not corrected and
the previously set time resumes.
for 2 seconds or more to cancel reception.
.
1
.
B
to finish the procedure.
0
.
1
.
2
to adjust the
B
to finish the procedure.
0