Download Print this page

Advertisement

Quick Links

English
• This watch is solar-powered. Expose the dial to light and use it sufficiently charged.
• To see details of charging time, specifications and operations, refer to the instruction manual:
Component identification
Hands and buttons
Hour
hand
24-hour hand
Second
hand
ALM
Rotating bezel
• Actual appearance may differ from the illustration.
• The crown has two positions when pulling it out.
Checking the power reserve
You can see current power reserve amount by referring to the power reserve
indication.
1.
Pull the crown out to position 1 .
The second hand points to 30 seconds and stops.
2.
Rotate the crown to move the mode hand to point [TME].
3.
Push the crown in to position 0 .
4.
Press and release the lower right button A .
The function hand indicates power reserve and the second hand indicates
the previous reception result.
Level
3
Indication
About 10 ‒ 7
Duration
months
Power reserve is
Power reserve
sufficient.
is OK.
Meaning
OK for normal use
5.
Press and release the lower right button A to finish the
procedure.
The second hand returns to indicate the second.
• The hand returns automatically in 10 seconds without pressing the button.
E660 Abbreviated instruction
Function hand
Minute hand
60
RX
LON
Button
Crown
ON
OFF
SMT
TME
TME
Button
AKL
Mode hand
Crown's position
0 1 2
2
1
About 7 ‒ 1
About 1 month -
3 days or shorter
month
3 days
Insufficient
Power reserve is
charge warning
getting low.
has started.
Charge immediately.
E660 instruction manual
Indication
B
Power reserve
indication
Area indication
Mode indication
TME
ALM
CHR
SET
A
Alarm indication
(ALM ON/OFF)
Checking the previous signal reception result
1.
Pull the crown out to position 1 .
The second hand points to 30 seconds and stops.
2.
Rotate the crown to move the mode hand to point [TME].
3.
Push the crown in to position 0 .
4.
Press and release the lower right button A .
The function hand indicates power reserve and the second hand indicates
the previous reception result.
OK
0
RX
LON
NO
5.
Press and release the lower right button A to finish the
procedure.
The second hand returns to indicate the second.
• The hand returns automatically in 10 seconds without pressing the button.
RX
LON
ON
OFF
SMT
TME
ALM
TME
AKL
RX
LON
The reception was successful.
RX
LON
The reception failed.
Reception-in-progress
indication (RX)
Reception result
indication (OK/NO)
Day of week
indication
Summer time
indication (SMT
ON/OFF)
Date
indication
RX
LON

Advertisement

loading

Summary of Contents for Citizen E660

  • Page 1 E660 Abbreviated instruction English • This watch is solar-powered. Expose the dial to light and use it sufficiently charged. • To see details of charging time, specifications and operations, refer to the instruction manual: E660 instruction manual Component identification Hands and buttons...
  • Page 2 E660 Abbreviated instruction Checking the current world time setting Receiving the signal manually (on-demand reception) • It may take 2 - 15 minutes to receive time signals. Pull the crown out to position 1 . Pull the crown out to position 1 .
  • Page 3 E660 Abbreviated instruction Setting summer time Adjusting the time and calendar manually Pull the crown out to position 1 . Checking the summer time setting Rotate the crown to move the mode hand to point [SET]. Pull the crown out to position 1 .
  • Page 4 E660 Abbreviated instruction Checking the reference position Resetting the watch — All Reset Pull the crown out to position 1 . Pull the crown out to position 1 . Rotate the crown to move the mode hand to point [CHR].