Citizen E650 Abbreviated Instruction

English
• This watch is solar-powered. Expose the dial to light and use it sufficiently charged.
• To see details of charging time, specifications and operations, refer to the instruction manual:
Component identification
Function hand
• Power reserve
• Chronograph minute
• Day of week
Hour hand
24-hour hand
ON/OFF indication
• Summer time
• Alarm hand
• Actual appearance may differ from the illustration.
• The crown has two positions when pulling it out.
• Refer also to our web page for detail of usage of the
scale and bezel on the watch.
(http://www.citizenwatch-global.com/support/
pdf/enhanced/e.pdf)
Changing the mode
This watch features the eight different modes as follows:
LON The time of London and areas of the same time zone is indicated.
NYC The time of New York and areas of the same time zone is indicated.
CHI The time of Chicago and areas of the same time zone is indicated.
DEN The time of Denver and areas of the same time zone is indicated.
LAX The time of Los Angeles and areas of the same time zone is indicated.
Mode for using the chronograph.
CHR
ALM Mode for using the alarm function.
Mode for setting time difference from UTC (Coordinated Universal Time) and
A-TM
indicating the time of a different time zone.
1.
Pull the crown out to position
The second hand points to 30 seconds and stops.
2.
Rotate the crown to change the mode.
• Turn the crown so that the mode hand will point to a marker of the mode
indication securely.
3.
Push the crown in to position
Indication of the watch changes into that of the mode selected.
• It may take some time to change indication.
E650 Abbreviated instruction
Reception indication
• RX: reception-in-progress
• H/M/L/NO: Reception result
Button B
Crown
Minute hand
Button A
Date indication
Mode hand
Second hand
Crown's position
0 1 2
.
1
to finish the procedure.
0
E650 instruction manual
Checking the power reserve
1.
Change the mode to [LON], [NYC], [CHI], [DEN], [LAX] or [A-TM]
and push the crown in to position
2.
Press and release the lower right button
The second hand indicates reception result and the function hand indicates
power reserve in levels.
3.
Press and release the lower right button
procedure.
• It returns to normal indication automatically in about 10 seconds without
pressing the button.
Indication of power reserve in levels
3
Level
Indication
Duration
10 - 7 months
(approx.)
Power reserve is
sufficient.
Meaning
OK for normal use.
Checking the signal reception result
• This watch receives the time signal at 2:00 AM every day and adjust the time
and calendar automatically. If the 2:00 AM reception was unsuccessful, it tries
signal reception again at 3:00 AM and 4:00 AM.
1.
Change the mode to [LON], [NYC], [CHI], [DEN] or [LAX] and push
the crown in to position
2.
Press and release the lower right button
The second hand indicates reception result and the function hand indicates
power reserve in levels.
Indication
H Received signals in a very good condition
Received signals in a good condition
M
L Received signals in a not-good condition
NO The reception failed.
• "H", "M" and "L" only indicate the condition for reception, not related to
the reception performance of the watch.
• Try signal reception following the steps in
(on-demand reception)
3.
Press and release the lower right button
procedure.
• It returns to normal indication automatically in about 10 seconds without
pressing the button.
1/3
.
0
.
A
to finish the
A
2 1
7 - 1 month 1 month - 3 days
Power reserve is Power reserve is
OK. getting low.
Charge immediately
.
0
.
A
Reception result
Receiving the signal manually
if the last reception failed.
to finish the
A
0
3 days ‒
Insufficient
charge warning
has started.