Citizen E610 Instruction Manual page 8

[Reception Procedure]
Take the watch off of your wrist, face the 6:00 position
towards the radio wave transmitter station and place
the watch in a stable location that allows radio waves
to be received easily such as near a window.
• In the case of On Demand Reception, press button
(A) located at the 4:00 position for at least
2 seconds. Release your finger after you hear a confirmatory tone and the second hand
begins to move to the RX: Reception in progress (12:00) position.
• It is not necessary to press button (A) in the case of Automatic Reception.
• It may be difficult to receive radio waves at sunrise or sunset. Avoid these times when
receiving radio waves. Refer to section 4 entitled, "Reception of Radio Waves" for further
details on the procedure for receiving radio waves.
[Confirmation of Reception Result]
Confirm the reception result by pressing button (A) located at the 4:00 position after having
received radio waves to determine whether radio waves have been successfully received.
If the second hand points to "H, M or L", this indicates that radio waves have been
successfully received. The watch can now be used.
If the second hand points to "NO", this indicates that radio wave reception has failed.
109