Product Description - Wallbox Pulsar Installation Manual

Hide thumbs Also See for Pulsar:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
Connector Recommendations
• Always check the charging cable and the contacts for damage and contamination before use.
• Never use a damaged charging cable, the vehicle plug, or the infrastructure electrical outlet to charge.
• Never use contacts that are dirty or wet.
• Only connect the connector to vehicle plug and infrastructure electrical outlets that are protected
against water, moisture and liquids.
• After stopping the charging process, the vehicle connector and the equipment plug can be
disconnected. Never use force to disconnect the vehicle connector from the inlet or the equipment
plug power outlet. Such dangerous activity can cause serious injuries or even death.
• Depending on the charging station and the electric vehicle, the time to complete the charging process
and the duration of unlocking may vary.
• Some vehicles can be started with the charging cable connected. Be sure to unplug before driving off.
• Do not use the charging cable with an extension cable or an adapter.
• If the connector emits smoke or begins to melt, never touch the charging cable. If possible, stop the
charging process. In any event, disconnect the power supply from the Wallbox device.
• Keep the charging cable out of the reach of children.
• Be careful with the connector, do not step on it or on the cable.
• The cable should NOT be tightened under ANY CIRCUMSTANCES while connected to the vehicle.
Important information for the correct disposal of the product in accordance with Directive 2012/19/EC.
At the end of its useful life, the product will not be disposed of as urban waste. It must be taken to a
collection center for special and differentiated waste or to a distributor that provides this service.

Product Description

Introduction
Wallbox Pulsar is a practical and intelligent charging system for electric vehicles and plug-in hybrids. Pulsar's
design is the most compact on the market and features the most advanced technology to provide the
maximum charging performance for the vehicle. It adapts to any installation, both private garages and
community or company parking.
Through the myWallbox platform you can monitor energy consumption, view charging history and schedule
charging sessions. You even have the option of configuring your Wallbox so that it charges at the most cost-
effective time of day.
5

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pulsar plus

Table of Contents