Table of Contents
Advertisement
E N
Disable V2G port
This port is meant for externally stop the dis-
charging process (and the power injection to
the grid), as required by local regulations (ex:
G99 for United Kingdom). Remove the jumper
and connect there the cables from external
equipment trought the sealing grommet.
This port is optically opto-isolated and is activated by setting an open-circuit on it. When a short circuit is
present at this port, the charger is allowed to inject power to the grid, based on its configuration.
3G/4G interface
In order to install the 3G/4G interface (optional feature, requires an accessory), please be sure you have
the instructions to perform this installation. In case of any doubt contact your sales agent
Add Charger to your myWallbox Account (optional)
Download the Wallbox App available from Android Play Store or Apple App Store.
At this point the Wallbox charger is registered in myWallbox.
16
Step 1: Log-in using your
account.
Disable V2G port
Step 2: Add your charger
by clicking on the "+" button
on the main page, introduce
the SN and UID of your
charger
Advertisement
Table of Contents
