Product Description - Wallbox Pulsar Installation Manual

Product Description

INTRODUCTION
Wallbox Pulsar is a practical and intelligent charging system for electric vehicles and plug-in hybrids.
Pulsar's design is the most compact on the market and features the most advanced technology to
provide the maximum charging performance for the vehicle. It adapts to any installation, both private
garages and community or company parking.
Through the myWallbox platform you can monitor energy consumption, view charging history and
schedule charging sessions. You even have the option of configuring your Wallbox so that it charges at
the most cost effective time of day.
GENERAL SPECIFICATIONS
Model
Cable length
Connector type
Charging mode
Dimensions
Weight
Operating temperature
Storage temperature
CE Mark
ELECTRICAL SPECIFICATIONS
Maximum output
Input voltage
Maximum current
Rated frequency
Protection rating
Surge category
RCCB
USER INTERFACE AND COMMUNICATIONS
Connectivity
User identification
User interface
Charging status information
Included features
(1) Only available for type 2 3P chargers.
(2) 3P only available for type 2.
(3) Type A or Type B according to local regulations.
4 en
Type 1 (SAE J1772) or Type 2 (IEC 62196-2)
166x163x82 mm (without cable)
LVD2014/35/EU, EMCD 2014/30/EU IEC61851-1,
7.4 kW (1P) / 22 kW (3P)
110/230 VAC ± 10% (1P) / 400 VAC ±10% (3P)
Charging current configurable from 6 A to 32 A
External RCCB
Wallbox app / myWallbox Portal
Halo RGB LED / Wallbox app
Power Sharing Smart (slave only)
Pulsar
(1)
5 m (7 m optional)
Mode 3
1 kg (without cable)
-25 ºC to 40 ºC
-40 ºC to 70 ºC
IEC61851-22, IEC62196-1
(2)
(2)
32 A, 5x6 mm 2 cable
50Hz / 60 Hz
IP54 / IK08
CAT III
required
(3)
Bluetooth
Wallbox app
4