Main Features - King gates Rolls 700 Instruction Manual

Before installing the product ascertain that safety conditions are observed according to the law, rules and regulation.
Use personal safety devices and locate warning signs on the motorized gate.
Unfulfilment of the below listed direction will release the King gates srl from any responsibility for damage caused to people or
things.
-Ascertain the intigrity of the packing when opening it.
-In case of anomalies in the functioning, turn immediatly off the gear-motor, disconnect electrical power and operate the gate
manually the problem has been found and salved.
-Do not modify the product in any part.
-Only authorized and qualified staff is alloned to disassemble the product.
-Prevent any part of the automation from being next to any source of heat or in contact with liquid substances.
-Use only adeguate power supply cables.
-To optimize the functioning of the automation, King gates accessories only.
-Disposal of waste material has to observe local regulations.
-Installing, testing and first functioning have to observe the laws in force.
TECHNICAL SPECIFICATIONS AUTOMATION
Power supply
Motor power supply
Max thrust
Electrical input
Working temperature
Max dimensions sectional doors
Max dimensions overhead doors
Transmission gear
Speed
Frequency of use
Motorgear dimensions
Slide thickness
Limit switch
TECHNICAL SPECIFICATIONS STAR GDO100
Transformer power supply
Control unit power
Motor output
Max current peak from the motor
Accessories power
Environmental operating temperature
Courtesy light
Courtesy light operation
Receiver
Flash light
17
WARNINGS

MAIN FEATURES

(Vac 50Hz)
(Vdc)
(N)
(A)
(°C)
2
(m )
2
(m )
(cm/sec.)
(%)
(mm)
(mm)
Encoder with mechanical stop
(Vac)
(Vac)
(Vdc)
(A)
(Vdc)
(°C)
(Vac )
(Vdc)
Rolls 700
230
24
700
0.8
-20 ÷ +55
10
10
M8, Z18
9 - 16
60
414x264x110
37
Star GDO 100
230
230
24 (max 100Watt)
8
24 (400mA)
-20 ÷ +55
230 (max 40W)
Activated by remote control
433 MHz incorporated with 180 storable codes
24 (max 15W)
Rolls 1200
230
24
1200
1.3
-20 ÷ +55
17
14
M8, Z18
9 - 16
60
414x264x110
37
Encoder with mechanical stop