Table of Contents
Advertisement
Height adjustment
The support castors are height adjust-
able.
After loosening the clamping screws
(fig. 54/
) position the tube of the
support castor (fig. 54/
ance with the drive wheel.
Tighten the clamping screw (fig. 54/
).
Correct support castors length
The support castors must reach further
out than the drive wheels in order to
achieve a sufficient support function.
Attention:
For sufficient tilting stability both
!
support castors are to be posi-
tioned at the same height.
•
To increase the tilting stability nev-
er drive without the support cas-
tors swivelled to the rear.
•
Have the function checked by the
specialist dealer after each change
to the seat height and wheel size!
Note:
Observe the brochure < safety in-
structions for mechanical wheel-
chairs > the chapters < driving up-
hill, overcoming obstacles > as well
as < driving on elevators, lifting
platforms and escalators >!
) in accord-
54
2
1
45
Advertisement
Table of Contents
