ABDUCTION WEDGE
The abduction wedge bracket needed
for this can also be assembled on an
afterthought underneath the front
seat surface.
Depth adjustment
Loosen the clamping screws (fig. 68/
) so far that no damage to the coat-
ing occurs during the adjustment.
After loosening the clamping screw
(fig. 68/
) underneath the seat sur-
face adjust the abduction wedge ac-
cording to the personal needs of the
user.
Tighten the clamping screw (fig. 68/
).
Attention:
Only pull out the abduction wedge
!
so far that the abduction wedge
rail for depth adjustment is flush
with the rear end of the abduction
wedge bracket!
Height adjustment
Loosen the clamping screws (fig. 68/
) so far that no damage to the coat-
ing occurs during the adjustment.
52
67
1
68
After loosening the clamping screw
(fig. 68/
) adjust the abduction
wedge to the personal needs of the
user.
Tighten the clamping screw (fig. 68/
).
Attention:
Retrofitting is only to be carried out
!
by an specialist dealer!
2