Table of Contents
Advertisement
COMPONENTS
ARMRESTS
Attention:
Do not use wheelchair without
!
armrests guards fitted.
Do not use the armrests to lift or
carry the wheelchair.
Adjusting the seat width
The seat width can be adjusted by a
lateral displacement of the armrests
(fig. 7).
Operate parking brakes. – This pre-
vents the wheelchair from rolling away
accidentally.
Loosen the clamping screws (fig. 8/
so far that no damage to the coating
occurs during the adjustment. After
loosening the clamping screws (fig. 8/
) adjust the armrest by the same dis-
tance on both sides.
After the adjustment tighten the
clamping screws (fig. 8/ À) on both
sides securely.
Attention:
The maximum seat width has been
!
reached when a marking is visible
on the square tube.
7
)
8
1
15
Advertisement
Table of Contents
