Strapping On The Lap Belt With Lock; Putting On The Lap Seatbelt With Velcro Fastener - Ortopedia solero 9.072 Operating Manual

Strapping on the lap belt with
lock
Pull both belt halves to the front
and slide the catch halves together
so that they latch together (fig. 61).
Then carry out a pull test.
You open the lap seatbelt by pressing
in the red unlocking button (fig. 61/
).
Putting on the lap seatbelt with
velcro fastener
Guide the belt end with the Velcro
strip through the clasp and then
close the Velcro fastener. Then car-
ry out a pull test.
Attention:
Make sure that no objects are
!
trapped between belt and the
body! – Thus you avoid painful
pressure points.
Note:
The lap seatbelt should not be too
tight.
61
1
49