Assembly Of The Wheelchair - Ortopedia solero 9.072 Operating Manual

ASSEMBLY OF THE WHEEL-
CHAIR
To assemble the wheelchair mount all
parts in reverse order.
During reassembly, ensure that each
part is correctly installed and securely
fastened. Check that components are
correctly positioned. Check the correct
seating of the components.
Note:
The securing ring of the cotter pin
has to be folded over completely
so that it reaches beyond the met-
al flaps (fig. 6/
Note:
Therefore observe chapter < back
cushion >, < legrests > and < arm-
rests >.
12
)!
6
1