Table of Contents
Advertisement
Attaching the legrests
Hang the legrest from the top into the
respective legrest receptacle and swivel
forward until it locks into place.
Attention:
After swivelling the legrest inward
!
again do not forget to check the
corresponding locking device.
Adjusting the entry width
The legrest receptacle on the side
frame can be adjusted sideways,
through which the entry width can be
adjusted to the user.
Loosen the clamping screws (fig. 16/
) so far that no damage to the coat-
ing occurs during the adjustment. Then
move the legrest receptacle sideward.
Note:
To reposition the legrest lift it
slightly so it does not jam in the
guide rail.
After the adjustment retighten the
clamping screws (fig. 16/
16
).
1
21
Advertisement
Table of Contents
