Table of Contents
Advertisement
3.
4.
If everything works as described above,
you can open the CO2 bottles.
To control the CO2 Jet, push the 230V
switch on the controller in the ON
position.
The valve inside the CO2 Jet will open
immediately and the CO2 will come out of
the CO2 Jet.
As soon as the 230V switch is in the OFF
position the valve will close and the effect
will stop.
Use a MAGICFX® Effect'Ivator as
controller.
To control by DMX, use a DMX Switch
Pack.
Version 1.0
Page 14
Advertisement
Table of Contents
