Table of Contents
Advertisement
P C <–> Serial Hub LAN connection in an existing network
3 8 B
The Serial Hub is connected with a patch cable (not cross-over cable) to a hub or switch
in an existing network to which the operating PC/Notebook is connected as well. The
PC usually automatically obtains a free IP address from the server.
The LAN connection of the operating PC to the network can be checked as described in
the previous section.
SIEMENS AG
In the "Local area connection status"
window, go to
"General"
to display the status of the network
connection.
Under "Details" you can check at the
settings assigned to the connection.
Here, the network addresses are
automatically assigned by a DHCP server
in the network.
After you have started the configuration
tool, all Serial Hubs connected in the same
network segment are located automatically
and can be configured (see Section
"Configuration tool").
Page 23 of 51
Manual 7XV5655-0BA00
C53000-G1176-C174-4
Advertisement
Table of Contents
