Figure 1-11 Replacing The Cover - Digital Equipment 600a Upgrade Manual

22. Line up the flanges on the inside of the bottom-left portion of the cover so that they
overlap the edge of the chassis body. (See Figure 1-11.)
23. Slide the cover forward to secure it into place. Fasten the system cover with the three
c
thumbscrews provided.

Figure 1-11 Replacing the Cover

24. Plug in the power cord.
25. Power on the system.
26. Reinstall Windows NT. Refer to EK-ALMIA-UI, Windows NT, and Appendix A for
details.
27. Place the old MLB in the ESD-protected bag which the new one came in and store it
in case you wish to use it in the future.
DIGITAL Personal Workstation 600a Upgrade Guide 1–13
The 600a Upgrade
1
MLO-013605