Additional Safety Information - Eastwood CONTOUR SCT Instructions Manual

ADDITIONAL SAFETY INFORMATION

6
• Dust and fine particulate matter is generated during the sanding/grinding
process which can contain toxic substances such as lead, silica, solvents
and others. Breathing this dust and fine particulate matter can cause many
serious respiratory health conditions. Always use NIOSH approved respira-
tory protection while using this tool.
• This tool will eject particles, dust and sparks at high velocity during opera-
tion. Wear approved eye and skin protection at all times while operating.
• Sanding and grinding can generate excessive noise. Wear appropriate
hearing protection while using.
• The rotating drum of this tool can quickly catch loose clothing, long hair or
jewelry causing serious personal injury. Keep all loose clothing, long hair
and jewelry away from operating tool.
• Always unplug the tool from the electrical supply before changing drums.
• Rotating abrasive drums can quickly remove flesh. Keep hands and fingers
away from rotating components and always wear protective work gloves
while sanding/cleaning.
• This tool can quickly and violently kick back or twist while operating caus-
ing severe hand and or wrist injury. Do not apply excessive force to tool
while in use. Use only on broad, open spaces using care to avoid edges
and corners. If smaller objects are being sanded, be sure they are securely
mounted or anchored before beginning.
• Incorrectly rated drums can disintegrate at high RPM causing serious
personal injury. Always use replacement drums rated for 3700 RPM
operation or greater.
• Damaged drums can disintegrate at high speed causing personal injury or
property damage. If excessive vibration is felt, discontinue use immediately
and disconnect tool from electrical supply. Inspect drum and tool for
damage. Do not resume use until resolution is found.
• This tool will eject a trail of sparks at high speed which can ignite
flammable materials or injure others nearby. Do not operate in the
vicinity of flammable materials and keep all persons and pets away
from the work area.
• Always make sure the workpiece being buffed/cleaned/sanded is securely
clamped or anchored to allow two handed operation of the tool.
Eastwood Technical Assistance: 800.343.9353 >> techelp@eastwood.com
HEALTH AND INJURY HAZARDS!