The Eastwood 24" Slip Roll is a professional metal fabricators tool which is indispensable for producing accurate bends, cylinders and conical shapes
for virtually all metal working projects. In addition, the Upper and Rear Rollers feature grooves in 3 popular sizes for forming curves in Wire and Tubing.
The gear-driven, design delivers maximum forming power with minimal handle force.
INCLUDES
(1) 24" Slip Roll
(1) Crank Handle
(2) Thickness Adjustment Pins
SPECIFICATIONS
Maximum Material Working Thickness
Roller Diameter
Minimum Forming Radius
Wire & Tubing Forming Sizes
SAFETY INFORMATION
READ INSTRUCTIONS!
Thoroughly read and understand this instruction manual before using the Slip Roll.
INJURY HAZARD!
•
WARNING! This tool has rotating rollers and gears with amplifi ed leverage which can quickly cause severe injury!
Keep fi ngers and hands away from moving parts when operating.
• Wear thick, well-fi tting gloves to prevent cuts from handling sharp metal.
•
Frequently inspect moving parts and structure of roller. If damage is observed, discontinue use immediately.
•
Make sure the roller is securely fastened to a solid work surface before use.
•
Always wear eye and skin protection when working with sheet metal as it may have sharp edges.
•
Keep loose clothing and/or hair away from the rotating parts of this tool.
2
Steel: 18 Gauge
Aluminum: 16 Gauge
1.5" [38mm]
(22 Gauge Steel): 1.5" [38mm]
3/16", 1/4", 5/16" [4.7mm, 6.3mm, 7.9mm]
Eastwood Technical Assistance: 800.544.5118 >> techelp@eastwood.com