Page 1
Item #65500 CONTOUR DSB DUSTLESS SANDING BLOCK SYSTEM SET-UP AND OPERATING INSTRUCTIONS...
Page 2
Eastwood. WARRANTY REPAIR: If Eastwood confirms the existence of a defect covered under this warranty plan, Eastwood will determine whether repair or replacement is the most suitable option to rectify the defect. At Eastwood’s request, the purchaser must return, to Eastwood, any products claimed defective under Eastwood’s warranty.
Shop Vacuum requirements: 3.0 PHP (Peak Horse Power) is the minimum recommend for optimal performance. The vacuum should have a HEPA filter or HEPA bag installed to reduce respiratory health damage risk. Sandpaper compatibility: Eastwood Elite Contour DSB PSA Paper. #65490...
• Proper adjustment of the Flow Control Valve (e) and the Primary Adapter Regulator Ring (g) are essential for optimal performance of the DSB System and to prevent the vacuum from stalling and possible overload. See Airflow Adjustment Guideline Table for set-up tips. Eastwood Technical Assistance: 800.343.9353 >> tech@eastwood.com...
[a] Dustless Sanding Block [b] Vacuum Plate [c] Hose Fitting [d] Vacuum Hose Assembly [e] Flow Control Valve [f] Primary Adapter Regulator [g] Primary Adapter Regulator Ring [h] 1.75” Vacuum Hose Adapter To order parts and supplies: 800.343.9353 >> eastwood.com...
Page 6
TECH TIP: Wrapping electrical tape around the adapters works great to tighten up the fitment if loose. Primary Adaptor Regulator Shop Dustless Vacuum Sanding Hose Block FIG. 3 FIG. 3 FIG. 4 FIG. 4 Eastwood Technical Assistance: 800.343.9353 >> tech@eastwood.com...
Page 7
Vacuum Plate [b]. Fold up the edges of the sandpaper and stick them to the sides of the block (FIG 7). FIG. 6 FIG. 6 FIG. 7 FIG. 7 To order parts and supplies: 800.343.9353 >> eastwood.com...
Page 8
• If the DSB is not capturing sanding dust, further close the Primary Regulator Adapter Ring [g] until dust is being collected. If this has no effect, verify the vacuum filter or bag is not clogged or overfilled. Eastwood Technical Assistance: 800.343.9353 >> tech@eastwood.com...
Page 9
FIG. 9 FIG. 9 • Always utilize a powder or liquid guide coat such as #12416Z Eastwood Guide Coat Black Aerosol 12 oz. to ensure correct leveling and removal of sanding scratches. Apply an even, light coat covering the sanding area (FIG 8).
1/2” outside diameter coupler (not included). Couplers are commonly available from home improvement or automotive centers. • This will double the length of the vacuum hose and allows you to place your shop vacuum in a more remote location to reduce noise in the work area. To order parts and supplies: 800.343.9353 >> eastwood.com...