Endo function
Purge
300
S
0
rpm
1.00
1
2
Ncm
Endo 3
Purge
20
Dentsply Sirona
The speed and torque of the rotating
instrument can be set precisely using the
Endo function.
The basic functionality of the Endo func-
tion is described below. For more informa-
tion, please refer to your complete Intego
Operating Instructions.
Switching on the Endo
function
The Endo function is assigned to the burr
drive removed from the holder.
The desired electric motor for the Endo
function is removed from the holder.
Press the
grated Torque Control
dialog Motor.
If the Endo function is turned on, the
preset torque of 1.00 Ncm (Newton
centimeter) is displayed on the EasyPad
B
display. The
is illuminated. With the EasyTouch, the
Endodontics dialog
Cal
Switching off the Endo
function
If the Endo function is switched on, when
the burr drive assigned to the Endo func-
tion is removed from the holder, the torque
or
speed of the contra-angle handpiece
displayed instead of that of the motor on
the EasyPad display. To show the
speed
removed, the Endo function must first be
switched off.
Press the
Endo function
The
out on the EasyPad. On the EasyTouch,
the key
blue again. When the burr drive is
removed from the holder, the speed of
the motor is displayed.
Endo / Purge
Endo function
again when the burr drive is
Endo / Purge
key again.
Endo function
Endo function
key or the
key in the sub-
status display
is displayed.
motor
key (< 1s) or the
status display goes
is displayed in
Inte-
is