Pulizia E Manutenzione - Faema Diplomat E91/A Manual

English
9. Cleaning
Steam and hot water dispensing pipes
Using a clean sponge, wash with hot water removing any organic
residue present. Rinse carefully.
To clean the inside of the steam nozzle, follow these steps:
Turn the nozzle towards the cup tray and carefully activate steam
dispensing at least once.
Grille and Drip Basin
Remove the grille from the basin, extract the grille sections and complete
the cleaning operation under running water.
Discharge Basin
At the end of the working day, pour about a liter of hot water into it to
remove any discharge residues.
Bodywork
Use a soft cloth and cleaning products WITHOUT ammonia or abrasives,
removing any organic residue present in the work area.
N.B. Do not spray liquids into the panel slots.
ATTENTION
!
When the machine has not been used for more than 8
hours, and in any case once a day, the internal
components must be washed before use, in
accordance to the following instructions:
Supply Groups
Insert the filter carriers into the groups (without coffee) and
dispense from each group for one minute.

Pulizia e manutenzione

Hot water
Dispense hot water repeatedly (using the relative command)
until at least 6 liters of water have been dispensed from the
2-group machine, 9 liters of water from the 3-group machine
and 12 liters from the 4-group machine.
Steam
Allow the steam to flow for approximately one minute, using
the appropriate commands.
English