Start-Up; How To Start The Device; Start-Up Checklist; Operating Concept - KROHNE POWERFLEX 2200 C Manual

START-UP

5

5.1 How to start the device

5.1.1 Start-up checklist

Check these points before you energize the device:
• Are all the wetted components (probe, process connection and gaskets) chemically resistant
to the product in the tank?
• Does the information on the signal converter nameplate agree with the operating data?
• Did you correctly install the device on the tank?
• Do the electrical connections agree with the national electrical codes?
5.1.2 How to start the device
• Connect the converter to the power supply.
• Energize the converter.
i Devices with the LCD display option only: Devices with the LCD display option only: After 10 seconds the screen will display "Starting Devices with the LCD display option only: Devices with the LCD display option only:
up". After 20 seconds the screen will display the software version numbers. After 30
seconds the default screen will appear.
• The device will display readings.
INFORMATION!
This chapter and the start of the chapter that follows tell you what data is given on the device
display in normal mode and how to change device settings in configuration mode. If you know
about how this device operates, you can ignore this data. Continue with the quick setup
procedure. For more data about this procedure, refer to Commissioning on page 77

5.2 Operating concept

You can read measurements and configure the device with:
• A digital display screen (optional).
• A junction box (ref. SJB 200W) connected to the circuit to measure loop current (optional).
• A connection to a system or PC with PACTware™. You can download the Device Type
Manager (DTM) file from the website. It is also supplied on the DVD-ROM delivered with the
device.
• A connection to a system or PC with AMS™. You can download the Device Description (DD)
file from the website. It is also supplied on the DVD-ROM delivered with the device.
• A connection to a HART
file from the website. It is also supplied on the DVD-ROM delivered with the device.
58
®
Field Communicator. You can download the Device Description (DD)
www.krohne.com
POWERFLEX 2200 C/F/S/D
10/2016 - 4005314002 - MA POWERFLEX 2200 R02 en
.