Annexes; Compliancy Declaration - Swegon COMPACT Unit Installation And Maintenance Instructions Manual

21

ANNEXES

21.1 Compliancy Declaration

Manufacturer (and whenever applicable its authorized representative):
Company: Swegon Operations AB
Address: Box 300, SE-53523 Kvänum, Sweden
Declares that:
Type of machine: Air handling unit
Machine No.: COMPACT Air, COMPACT Heat, COMPACT Top, COMPACT Unit and
accessories for each designation are covered by these directives
Conform with the Machinery Directive 2006/42/EC
Also conform to the following directives:
2014/30/EU, EMC
2009/125/EC, Ecodesign (Commission regulation (EU) No.
327/2011) 2009/125/EC, Ecodesign (Commission regulation (EU)
No. 1253/2014)
The following harmonised standards have been applied:
EN ISO 12100:2010 Safety of machinery - General principles for design - Risk assessment and risk mitigation
EN 60204-1:2006 Safety of machinery - Electrical equipment of machines - Part 1: Generic standards
EN ISO 13857:2008 Safety of machinery - Safety distances to prevent hazard zones from being reached by
arms and legs. EN 61000-6-2:2005 Electromagnetic compatibility (EMC) - Part 6-2: Generic standards -
Immunity for industrial environments
EN 61000-6-3:2007+A1 Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission from
equipment in homes, offices, shops and similar environments
EN 60730-1 Automatic electrical control and control unit for household use - Part 1: Generic standards
The following other standards and specifications have been applied:
EN 1886:2007 Ventilation for buildings - Air handling units - Mechanical performance
EN 13053:2006+A1:2011 Ventilation for buildings - Air handling units - Rating and performance for units,
unit sections and components
Person qualified to compile the technical documentation:
Name: Dan Örtengren
Address: Box 300, SE-53523 Kvänum, Sweden
Signature:
Place/Date: Kvänum / 19/06/2017
Name:
Clarification of signature:
Position:
60 www.swegon.com
EC DECLARATION OF CONFORMITY
FOR THE MACHINERY
Original
Directive 2006/42/EC, Annex II 1A
William Lawrance
Product Manager, Kvänum
Registered design. The company reserves the right to make design changes without prior notice.
Kvänum / 19/06/2017
Niklas Tjäder
Plant Manager, Kvänum
GB.COMPACTUT.170622